GT6000 Mobilis – Portable stack gas and emission analyzer

GT6000 Mobilis – Portable stack gas and emission analyzer

Key benefits

  • Intuitive user interface and ergonomic design
  • Easy to disassemble, carry, and set-up again
  • Multigas measurements in a portable package
  • Realtime results reliably and remotely
  • Exceptional robustness: shock and vibration resistivity by design
  • Smart software with self-diagnostics for easy and fast service
  • Suitable for on site or laboratory use

GT6000 Mobilis is the new frontier of portable emissions monitoring. The analyzer is specifically designed for those who aim high. It enables you to concentrate on the task at hand, without interferences from hard to use, time-consuming and unreliable tools. Sounds good, right? Do you need extreme portability, robustness and want to save time? Or reliable instrument, powerful analysis tools and rapid response times? GT6000 Mobilis provides this all and more. Read on to get the full picture of this solution.

Uncompromised Performance For Stack Monitoring

One of the most important resources for stack tester is time. You do not want to spend your time concentrating on futilities. We designed the GT6000 Mobilis so that the setup, measurements, and analysis happen smoothly and time-efficiently, in short, make your work easier. This flue gas analyzer is simple to set up and disassemble, and there are no loose screws and other small parts that can fall while in transit or on your way to the stack. Integrated sampling line supports make it is easier to use and there are fewer parts to carry around. The device enables you to measure all key compounds at once, including oxygen with PSS Plus. For ease of use, GT6000 Mobilis gives clear OK / Not OK on the software side to indicate if the device is ready or not for measurements. The PSS on the other hand has indicator lights to tell the same thing on its part. Results are available in mere minutes.

Sidekick in Emission Research

We recognize that time, money, and effort are valuable resources for you. The ease of use, multi-gas measurements, and immediate results let you focus on what is important, your research. With GT6000 Mobilis, even the smallest concentrations are measured with high accuracy. These measurements can be monitored on-site or even remotely. Results can be accessed via PC or tablet with Calcmet software. Additionally, as sometimes the measured compounds can be unexpected, with Calcmet software you can reanalyze measurement data afterward to identify these unknown gases. The system is easy to use, which reduces the need for supervision and can be used with minimal training, whether you are working in the lab or on the field.


Power of emission monitoring system in a portable package

GT6000 Mobilis (successor to our previous model DX4000) is designed to make life easier and the system more convenient for the user. And we do not say this lightly, but this powerful tool rivals fixed systems in its features.

The system is typically set up to measure H2O, CO2, CO, NO, NO2, N2O, SO2, NH3, CH4, HCl, HF and different VOCs and can measure up to 50 gases simultaneously. Additional gases can be easily added without any hardware changes. The corrosion-resistant sample cell is heated to 180 °C, which ensures that the sample stays in the gaseous phase even with high concentrations of H2O or corrosive gases. FTIR technology ensures that results will be available immediately on-site, and further analysis provides hard data for your specific needs

Paired with Portable Sampling System

GT6000 Mobilis is designed to be used with the portable sampling system, PSS Plus or PSS Base. PSS utilizes the hot-and-wet measurement principle (no drying or dilution), ensuring the analysis is done with a representative sample. There is two-stage particulate filtration: the first one in the sampling probe and the second one in the sampling system. The portable sampling system can be optionally equipped with a ZrO2 sensor for accurate oxygen measurement.

With an all-new design, the user experience has been taken to new heights. Integrated controls on the front, 2 handles and cables in the back provide smooth operation. While PSS Base offers a more basic design, for more hardcore work we have PSS Plus. PSS Plus comes with flow meters on the front and has an instrument air option. This makes the system easier and cheaper for user while also providing safer operation since nitrogen is only needed for background measurements.


Key benefits of PSS

  • User-friendly design
  • Instrument air option (PSS Plus)
  • Integrated controls accessible from Calcmet
  • IP42 rated

    Acest site folosește cookie-uri pentru a îmbunătăți experiența dumneavoastră. Informațiile stocate sub formă de cookie-uri nu vă identifică direct, dar contribuie la personalizarea experienței dumneavoastră pe acest site. Aveți controlul asupra setărilor cookie-urilor - puteți afla mai multe și să le schimbați dând click pe categoriile de mai jos. Blocarea anumitor cookie-uri poate afecta funcționalitatea site-ului și serviciile noastre.

    Close Popup
    Privacy Settings saved!
    Setările de confidențialitate

    Când vizitați orice site web, acesta poate stoca sau prelua informații din browserul dvs., mai ales sub formă de cookie-uri. Controlați-vă serviciile personale de cookie-uri aici.

    These cookies are necessary for the website to function and cannot be switched off in our systems.

    Technical Cookies
    In order to use this website we use the following technically required cookies
    • wordpress_test_cookie
    • wordpress_logged_in_
    • wordpress_sec

    Refuzați toate serviciile
    Acceptați toate Serviciile
    Open Privacy settings